SWT 1561SC is a continuous solid wire specially designed for 3D printing of high-strength aluminum alloys with Mg content >6%. It suits alloys like AlMg4.5Mn and AlMg5Mn. The addition of Ti and Zr refines the grain structure after the 3D printing molten pool solidifies, reducing thermal crack sensitivity during the process. This wire is now widely used in the 3D printing field.
SWT 1561SC is a continuous solid wire specially designed for 3D printing of high-strength aluminum alloys with Mg content >6%. It suits alloys like AlMg4.5Mn and AlMg5Mn. The addition of Ti and Zr refines the grain structure after the 3D printing molten pool solidifies, reducing thermal crack sensitivity during the process. This wire is now widely used in the 3D printing field.
SWT 1561SC is a continuous solid wire specially designed for 3D printing of high-strength aluminum alloys with Mg content >6%. It suits alloys like AlMg4.5Mn and AlMg5Mn. The addition of Ti and Zr refines the grain structure after the 3D printing molten pool solidifies, reducing thermal crack sensitivity during the process. This wire is now widely used in the 3D printing field.
TYPICAL WIRE COMPOSITION (%)
| Mn | Si | Al | Cu | Ti | Zr | Mg |
| 0.8 | 0.06 | 93 | 0.03 | 0.03 | 0.1 | 5.8 |
| Mechanical properties | |||
| Welding consumables | Y.S (MPa) | T.S (MPa) | El. (%) |
| 561SC | 160 | 330 | 256 |
Key Features
Application
Need a reliable welding wire solution? Fill out the form below, and we’ll send you a personalized quote within 24 hours. Let’s get started!
